FINE SPAVY ASSOCIATES & ENGINEERS PVT. LTD.
 
.




 

Analogue – Tensile Testing Machines

 
Tensile Testing Machines
Material Testing Machines, Universal Testing Machines, Impact Testing Machines, Hardness Testing Machines, Digital Torsion Testing Machines, Hardness Tester, Rockwell Hardness Testers, Brinell Hardness Tester, Spring Testing Machines, Dynamic Balancing Machines, Tensile Testing Machines, Fatigue Testing Machines, Vickers Hardness Testing Machines, Calibration of Testing Machines, Spring Testing Machines, Erichsen Testing Machines, Compression Testing Machines, Leaf Spring Testing Machines, Coil Spring Testing Machines, Spares for Testing Machines  FINE SPAVY ASSOCIATES & ENGINEERS PVT. LTD.
 

Analogue – Tensile Testing Machines ( Model : TKG )

 
 
Variety of tests like Tension, Compression, Cross breaking / Bending, Shear, Linear Bonding / Gripping / Peeling strength of adhesives & tapes, etc. are conducted.
Suitable for testing a wide range of materials like rubber, wood, plywood, plastic, rexins, ceramics, teflon, cardboard, latex, composites, ferrous metals, non-ferrous metals,etc. of various forms like round, flat, thread, wires, dumbells, fabric, belts, strips, ropes, etc.
Wide range of Grips, Attachments & Special fixtures are available to suit variety of material and shapes.
Continuous roll autographic “Load Vs Elongation” recorder.
Elongation scale with least count 1 mm.
Three measuring ranges for accurate testing.
A number of straining speeds are available for proper selection.
Machine with AC or DC drive motor is available.
Various Models – Maximum Capacity from 200 N to 50 kN.
Loading accuracy well within ±1%, conforms to IS:1828 / BS:1610.
Hand operated cutting press with different sizes dies are available for cutting dumbbell specimen.
 
 
Enquiry
 
     
 
Technical Specification For Tensile Testing Machines -
 
     
 

 Max. Capacity

 Model - TKG

Model - TKG

Model - TKG

 200 N

 500 N

 1000 N

 2500 N

 5000 N

 10 kN

 25 kN

 50 kN

 Measuring  Ranges

 1st

 0-50 N

 0-100 N

 0-200 N

 0-100 N

 0-250 N

 0-500 N

 0-200 N

 0-500 N

 0-1000 N

 0-500 N

 0- 1000 N

 0-2500 N

 0-1000 N

 0-2500 N

 0-5000 N

 0-2 kN

 0-5 kN

 0-10 kN

 0-5 kN

 0-10 kN

 0-25 kN

 0-10 kN

 0-25 kN

 0-50 kN

 2nd

 3rd

 Ranges  Least  Counts

 1st

 0.1 N

 0.2 N

 0.4 N

 0.2 N

 0.5 N

 1 N

 0.4 N

 1 N

 2 N

 1 N

 2 N

 5 N

 2 N

 5 N

 10 N

 0.004 kN

 0.01 kN

 0.02 kN

 0.01 kN

 0.02 kN

 0.05 kN

 0.02 kN

 0.05 kN

 0.1 kN

 2nd

 3rd

 Elongation  Scale   L.C

 1 mm

1 mm

1 mm

 Grip Speration Minimum -
 Maximum -

 25 mm
 1000 mm

25 mm
750 mm

25 mm
600 mm

 Traverse Speeds
 Standard Speeds

 10 Speeds  - 50, 100, 150, 200, 225, 250, 300, 400,  450 & 500 mm / min.

100 mm / min.

25 mm / min

 Optional Speeds

-

Additional speed of 50 mm/min

Alternative speed of 1.3 mm/min in place of 25 mm/min OR
10 Speeds  - 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm / min.

Additional speed of 500 mm/min

Alternative speed of 1.3 mm/min in place of 100 mm/min

10 Speeds - 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm/min.

 Optional Variable  speed  drive  stepless  variation

 50 to 500 mm / min.

10 to 100 mm / min.

2.5 to 25 mm / min.

 H.P  (for  standard  speed)

 0.25 / 0.5

0.5

0.5

 Supply

 3 –Phase,  415 Volts,  50Hz,  AC

 Over travel  safety

 Provided with each model

 Recorder  (Graph)

 Provided with each model

 
     
 
NOTE : It is very important that while ordering the machine due care is taken in selecting proper capacity, traverse speeds, grip separation & grips. Following details should be furnished to ensure that testing of the materials is in conformity with the standards followed –

• Size, shape, materials of test specimens.
• Minimum & Maximum breaking load for test specimen (Not strength).
• The standard  IS / BS / ASTM etc. to be followed.
• Straining rate required.
• Please send representative samples.
 
 
 
 

Dumb-Bell Specimen Cutting Accessories :

 
 
 
 
Hand Operated Cutting Press, Size 150mm x 150mm
Die overall length 50 mm as per IS:34 Part I & II, IS:5831
Die overall length 75 mm as per IS:3400 Part, IS:434 Part I & II, IS:5831
Die overall length 115 mm as per IS:3400 Part I, IS:2414, IS:2415 & IS:443
Die overall length 152 mm as per IS:2076
 
     
 
+ Grips for Tensile Testing Machines ( All Versions ) -
 
     
 

Model

Capacity

Description

Specifications

Application

TG 1/1

500 N

Eccentric Roller grip

25 mm wide x 3 mm thick

For Dumbell shaped specimen of rubber and plastics suits
TKG- 200 N  &  TKG -500 N

TG 1/2

2 kN

Eccentric Roller grip

25 mm wide x 5 mm thick

For Dumbell shaped specimen of rubber and plastics suits
TKG -1000 N  &  TKG-2500 N

TG 1/3

2 kN

Eccentric Roller grip

35 mm wide x 6 mm thick

For Dumbell shaped specimen of rubber and plastics suits
TKG- 1000 N  &  TKG -2500 N

TG 1/4

5 kN

Eccentric Roller grip

50 mm wide x 6 mm thick

For Dumbell shaped specimen of rubber and plastics suits
TKG -1000 N  &  TKG-2500 N

TG 1/5

5 kN

Eccentric Roller grip

50 mm wide x 6 mm thick

For Dumbell shaped specimen of rubber and plastics suits
TKG 5000 N  &  TKG  10 kN

 
     
 

TG 2/1

2.5 kN

Cam type grip

100 mm wide x 10 mm thick

For fabric strip suits TKG -2500 N

TG 2/2

2.5 kN

Cam type grip

100 mm wide x 10 mm thick

For fabric strip suits TKG -5000 N  &  TKG-10 kN

 
     
 

TG 3/1

200 N

Vice type grip

25 mm wide x 4 mm thick

For thin flat samples of smaller strength like paper etc suits
TKG -200 N

TG 3/2

5 kN

Vice type grip

500 mm wide x 25 mm thick

For flat materials like asbestos, leather, fabric, plywood suits
TKG -2500 N

TG 3/3

5 kN

Vice type grip

50 mm wide x 25 mm thick

For flat materials like asbestos, leather, fabric, plywood suits
TKG -5000 N & TKG-10 kN

TG 3/4

2.5 kN

Vice type grip

20 mm wide x 5 mm thick

For rigid wires upto 1 mm and flat strips suits  TKG -2500 N

TG 3/5

5 kN

Vice type grip

100 mm wide x 6 mm thick

For fabric specimen suits TKG-2500 N

TG 3/6

5 kN

Vice type grip

100 mm wide x 6 mm thick

For fabric specimen suits TKG -5000 N  &  TKG-10 kN

TG 3/7

5 kN

Vice type grip

200 mm wide x 10 mm thick

For fabric specimen suits TKG -5000 N  &  TKG -10 kN

 
     
 

TG 5/1

2.5 kN

Wedge type grip

25 mm wide x 5 mm thick

For flat strips and wires suits TKG -2500 N

TG 5/2

10 kN

Wedge type grip

Round 5 to 10 mm Flat 25 mm wide x 10 mm thick

For round specimen or flat specimen suits TKG -5000 N  & TKG -10 kN

TG 5/3

50 kN

Wedge type grip

Round 5 to 10 mm Flat 35 mm wide x 12 mm thick

For round specimen or flat specimen suits TKG -50 kN

TG 5/4

2.5 kN

Wedge type grip

Flat 25 mm wide x 20 mm thick

For extra thick plywood specimen suits   TKG -2500 N

TG 5/5

50 kN

Wedge type grip

Flat 200 mm wide x 5 mm thick

For geo textile as per ASTM suits TKG -50 kN

TG 5/6

50 kN

Wedge type grip

Flat 38 mm wide x 20 mm thick

For extra thick specimen like plywood suits TKG -25  & 50 kN

 
     
 

TG 6/1

2.5 kN

O ring test fixture

-

For testing O rings suits TKG -2500 N

 
     
 

TG 7/1

500 kN

Bollard  type grip

20 SWG or finer

For fine flexible wires suits TKG -200 N  &  TKG -500 N

TG 7/2

1000 kN

Bollard  type grip

Tape width 6 mm max.

For HDPE tape suits TKG -1000 N

TG 7/3

2.5 kN

Bollard  type grip

20 SWG or finer

For fine flexible wires suits TKG -2500 N

TG 7/4

2.5 kN

Bollard  type grip

20 SWG or finer

For fine flexible wires suits TKG -10 kN

TG 7/5

2.5 kN

Bollard  type grip

20 SWG or finer

For fine flexible wires suits TKG -25 kN  &  TKG -50 kN

TG 7/6

5  kN

Bollard  type grip

Dia 4mm ropes.

For non metallic ropes / cords  of nylon etc suits TKG -5000 N

 
     
 

TG 8/1

10 kN

Vice cum wedge type grip

Upto 5 mm dia,  Flat 25 mm wide x 5 mm thick

For wires and flat strips suits TKG -10 kN

TG 8/2

50 kN

Vice cum wedge type grip

Round 5 to 10 mm, Flat 35 mm wide x 10 mm thk

For wires. Rods, and strips suits TKG -25 kN  &  TKG -50 kN

TG 8/3

50 kN

Vice cum wedge type grip

Flat 35 mm wide x 5 mm thick.

For harder wires and strips suits TKG -25 kN  &  TKG – 50 kN

TG 8/4

50 kN

Vice cum wedge type grip

Flat 60 mm wide x 10 mm thick.

For wider flat strips suits TKG -25 kN  &  TKG -50 kN

 
     
 

TG 9/1

10 kN

Special Bollard grip

Dia 10 to 16 mm

For Nylon ropes suits TKG -10 kN

TG 9/2

25 kN

Special Bollard grip

Dia 10 to 16 mm

For Nylon ropes suits TKG -25 kN  &  TKG -50 kN

TG 9/3

50 kN

Special Bollard grip

50 mm wide

For flat belts and strips suits TKG -25 kN  &  TKG -50 kN

TG 9/4
50 kN
Special Bollard grip
100 mm wide
For flat belts and strips suits TKG -25 kN  &  TKG -50 kN
 
     
 
TG 10/1
10 kN
Grip for special
shaped specimen
As per IS 867
For moulded plastic specimen as per IS 867 suits TKG -2500 N
TG 10/2
10 kN
Grip for special
shaped specimen
As per IS 867
For moulded plastic specimen as per IS 867 suits TKG -10 kN

TG 10/3

10 kN

Grip for special
shaped specimen

As per IS 867

For moulded plastic specimen as per IS 867 suits TKG -25  kN  &  TKG -50 kN

 
     
 

TG 11/1

200 N

Compression cage

85 (L) x 60 (D) x 140 (H)  mm with dial gauge and scale

For compression test on flexible / soft materials suits TKG- 200 N

TG 11/2

200 N

Compression cage

85 (L) x 60 (D) x 140 (H)  mm without dial gauge and scale

For compression test on flexible / soft materials suits TKG -200 N

TG 11/3

2.5 kN

Compression cage

100 (L) x 65 (D) x 200 (H) mm

For compression test on flexible/soft materials suits TKG -2500 N 

TG 11/4

10 kN

Compression cage

150 (L) x 80 (D) x 200 (H) mm

For compression test on flexible/soft materials suits TKG -10  kN  

TG 11/5

50 kN

Compression cage

150 (L) x 150 (D) x 200 (H) mm

For compression test on flexible / soft materials suits TKG- 25  &  50  kN  

TG 11/6

50 kN

Compression cage with dial gauge scale and ball edge.

80 (L) x 60 (D) x 60 (H)  mm

For compression test on flexible / soft materials suits TKG -25  &  50  kN   

TG 11/7

50 kN

Compression cage with fixtures

As per IS 10570 / 83

For cold crushing strength suits TKG- 25 kN  &  50 kN

TG 11/8

10 kN

Compression cage with dial gauge and ball cage

50 x 50 x 50 mm specimen

For compression test on plywood etc suits TKG -10 kN 

 
     
 

TG 12/1

2.5 kN

Bend / cross breaking test fixture

50 wide x 25 thk x 150 mm span 5 mm roller radius.

For conducting cross breaking test or bend test suits TKG -2500 N

TG 12/2

10 kN

Bend / cross breaking test fixture

25 wide x 35 thk x 150 to 300 mm span.

For conducting cross breaking test or bend test suits TKG -10 kN

TG 12/3

25 kN

Bend / cross breaking test fixture

25 wide x 35 thk x 150 to 400 mm long span.

For conducting cross breaking test or bend test suits TKG -25 kN   &  50 kN

TG 12/4

25 kN

Bend / cross breaking test fixture

60 wide x 10 thk x 90 mm span roller dia 30 mm

For a specimen 60 wide x 10 thk x 120 mm  long suits TKG -25 kN  &  TKG 50 kN

TG 12/5

25 kN

MOR test fixture with compression cage

40 x 40 mm  specimen x 100 span

For conducting on refractory castables as per IS 10570 / 83 suits TKG 25- kN   &  50 kN

TG 12/6

1 kN

Cross breaking test fixture

50 wide x 100 mm span Roller radius 3.2 mm

For testing brake shoe material as per IS 2742 part 3 suits TKG- 2500 N

TG 12/7

2500 N

MOR test fixture

500 mm span x width 100 mm

For plywood.

TG 12/8

10 kN

MOR test Fixture with
dial gauge

600 mm span x 80 mm width support radius 12, 18, 27, 37.5 mm

For plywood.

TG 12/9

5 kN

Bend test Fixture

600 mm span x width 50 mm

For two point loading as per IS 1734 part II suits TKG-25 & 50 kN

TG12/10

10 kN

Cross breaking test fixture

Span 500 mm x width 100 mm Roller dia 15

For MOR test as per IS 1658 / 77.

 
     
 

TG 14/1

25 kN

Shear strength
attachment

20 mm width x 10 mm  thk

For testing internal shear strength as per IS 2742-92 Part 5 suits TKG -25  &  50 kN

TG 14/2

10 kN

Glue shear test attachment.

30 mm wide x 25 mm thk.

For glue shear testing of plywood suits TKG -10 kN

TG 14/3

10 kN

Shear test fixture

Dia 12.7 mm

For shear testing of laminates as per IS 1998 suits TKG -25  &  50 kN

 
     
 

TG 15/1

10 kN

Grip for plywood screw & nail withdrawl test

75 mm wide specimen

For testing plywoods as per IS 2380 part XIV suits TKG -10 kN

TG 15/2

10 kN

Grip for plywood tensile strength perpendicular to surface

50 x 50 mm specimen

For plywood as per IS 2380 Part V suits TKG -10 kN

TG 15/3

25 kN

Grip for plywood screw & nail with drawl test

75 mm wide specimen

For testing plywood as per IS 2380 Part XIV suits TKG-25 & 50 kN

TG 15/4

25 kN

Grip for plywood tensile strength perpendicular to surface

50 x 50 mm specimen.

For plywood as per IS 2380 Part V suits TKG - 25  &  50 kN

 
     
 

TG 21

10 kN

Special grip for fanhook

-

For testing fan hook suits TKG -25  &  50 kN

 
     
 

TG 22/1

1 kN

Grip for security of attachment of bottom stops of Zip

-

For testing of Zip as per Annexure D of IS: 3148- 1991 Fig.7 suits TKG -2500 N

TG 22/2

1 kN

Grip for security of attachment for top steps & puller

-

For testing Zip as per Annexure H of IS: 3148- 1991 (Fig 11 and Fig. 8)

 
 
 
 

Impact Testing MachinesUniversal Testing MachinesTensile Testing MachinesComputer Servo Controlled Ball Screw Driven Universal Testing MachinesCompression Testing MachinesSpring Testing MachinesHorizontal Chain and Rope Testing MachinesMicro Vickers Hardness TestersAutomatic Optical Brinell Hardness TestersMechanical ExtensometerSpecial Custom Built Testing MachinesMotorised Impact Testing MachinesASTM Pendulum Impact Testing Machines (Analogue & Digital Versions)Accessory of Pendulum Impact Testing MachineDynamic Balancing Machines (Microprocessor Based)Stroboscopic Balancing Machines SSBMVickers Hardness TestersDigital Rockwell Hardness TestersRockwell Hardness TestersRockwell Cum Rockwell Superficial Hardness TestersRockwell Cum Brinell Hardness TestersPortable Rockwell Hardness TestersDynamic Hardness TestersProving Rings & DynamometerElectronic ExtensometerBoss Microscope with software -for finding out Brinell Hardness valueENT Surgical MicroscopesOphthalmic Surgical MicroscopesA-Scan BiometerSkin Graft ExpanderBrinell Hardness Testing MachineOptical Brinell Hardness Testing MachineDigital Torsion Testing MachineDigital Fatigue Testing MachineEnd Quench Test ApparatusJomini Test FixtureProfile Projector